Pro Tips for Garage Door Maintenance

Pro Tips for Garage Door Maintenance


Garage door upkeep is sometimes ignored, but it should be a part of your routine twice a year for a yearly monitoring and maintenance. Overlooked garage doors can put a lot of strain on an automated garage door opener, so investing an hour or two each year between the early spring and late fall will save you money on repairs.

There is a simple procedure you can follow. You can schedule your garage door maintenance to match with other seasonal tasks like winterizing your landscape sprinklers and reactivating them in the spring or putting your lawnmower in and out of storing for the season.

In Operation, keep an eye on and listen to the door

Jerky motions and rough, scraping noises are common indications of garage door and automatic opener problems. When a garage is well-maintained and adjusted, it is reasonably quiet as it glides up and down, and there should be no jerkiness in its movement. Make that the pulleys, springs, and cables on both ends of the system are symmetrical. The quality of the rollers also matters. Check out Geelong roller doors for high-quality doors.

Clear the Tracks

Make that the tracks on the both sides of the door are clean and free of rust and debris. A level can also be used to ensure that the tracks are plumb (exactly vertical) throughout their vertical sections. Small track changes can be done by yourself, but significant track adjustments require the services of a skilled specialist.

Hardware should be tightened

The action and vibration of a usual garage door moving up and down hundreds of times per year can weaken the door and track components. Examine the brackets that secure the door track to the ceiling and walls, as well as the bolts that secure the garage door unit to the studs. Fasten any loose bolts you locate using a socket wrench.

Replace and Inspect the Rollers

At least 2 times a year, the rollers along the garage door’s perimeter should be checked, and every 5 to 7 years, they should be changed. Repair any rollers that are chipped, fractured, or worn throughout your inspection. The brackets that hold the wheels to the door can usually be removed by completely eliminating them.

Because the lower roller brackets on each side of the door are linked to the lift wires, which are under severe tension, do not remove them.

Check Pulleys and Cables

Examine the lift pulleys and cables¬†that connect the door’s lower roller brackets. These link the springs to the door, letting the door to be securely raised and dropped. The springs on garage doors might be one of 2 kinds: springs that extend Extension springs are long, slender springs that run crossways each door trail’s horizontal (overhead) part. Just above door that opens, torsion springs are attached to a metal rod. The door is lifted by wires in both models.

Springs and cables, according to most professionals, must not be touched by individuals since they are high-tension items that might be dangerous. Call in a service man if you notice any broken strands or other evidence of wear or damage on the wires.

Leave a Reply

Your email address will not be published. Required fields are marked *